网站首页
Evolis 印卡機
NISCA 印卡机
Matica 自动打凸字机
迪艾斯印卡机
Magicard 印卡机
班马牌证卡机
Fargo 印卡机
Datacard 印卡机
CardPresso发卡软件
安防监控系统
RETEX机柜
Identive接触/非接触式
PULSONIX PCB CAD 设计软件
PULSONIX强项
EBE
ISKRA 高压电容器
COMITRONIC-BTI
电位器
电子开关
OKW 旋钮头
产品目录
文件下载
联系我们

PULSONIX强项 

PULSONIX 高级功能

高级技术可选模组支持:

  • 微穿孔(Micro-vias)
  • 软硬底板(Flexi-rigid boards)
  • 隐藏嵌入式零件:电阻,电容及平面变压器(Embedded components: resistors, capacitors and planar transformers)
  • 内置嵌入式零件:半导体及簿芯(Internally embedded components within cavities: semiconductors and thinned dies)
  • 芯片上板COB(Chip-On-Board designs containing bare dies)
  • 层跨接通孔,区域,板外形切口和组件(Layer spanned Vias, Areas, Board Outline Cutouts and Components)


PULSONIX 开发团队非常积极地将薄型模具技术应用于Pulsonix。 他们大量参与欧洲资助的项目HERMES,对Pulsonix产品取得了非常成功的积极成果。

 

微穿孔(Micro-vias)

微穿孔(Micro-vias)

Micro Vias 3D View

Micro-vias can be easily integrated into your design using functionality within the Layer Spans option. Create intelligent Micro-vias, laser-drilled from the top or bottom sides and differentiated from other non-lasered vias. Micro-via types for normal, tapered, stacked, composite and stacked/tapered can be created to suit your manufacturing processes and requirements. Where Micro-vias require a Stop pad for laser-drilling, this can style can also be defined, as well as a Start pad definition. Composite Micro-vias can be created for multi-spanned vias; these would be separate vias moving as one 'unit' in the design for maximum design integrity.

 

软硬底板(Flexi-rigid boards)

 

Flexi-rigid Designs

Flexi-Rigid Design

True Flexi-rigid support is available using the features within the Advanced Technology package; Multi-spanned layer Areas, Board Outlines and Layer Spanned Components. Using these powerful options, the Board outline can be created to span 'internal' flexi layers that are still exposed externally. Adding Components to this layer span then allows them to also be exposed to the 'air'. Both through-hole and surface-mounted components on inner flexi layers can be achieved but with true 'side' and layer characteristics available within their Property definitions. This means true assembly reports, manufacturing plots and build details can be exported for an accurate manufacturing process.

隐藏嵌入式零件:电阻,电容及平面变压器(Embedded components: resistors, capacitors and planar transformers)

 

Embedded Component Technology (ECT)

Embedded Components

Embedded components are becoming more and more common as the need for smaller more dense designs is required. The Pulsonix Advanced Technology option enabled truly embedded components to be properly defined and placed within the board structure, either on an inner surface or internally embedded within the board substrate layer sitting inside a cavity. Using the embedded option, components such as buried and printed resistors, build-up and buried capacitors, planar convertors and transformers can also be easily accommodated such is the flexibility of the Pulsonix interface.

 

COB(Chip-On-Board Design)

Chip on Board

True chip-on-board design requires accurate die and bond pad placement, true connectivity between these pads, accurate shape definition and a host of placement, checking and manufacturing requirements; Pulsonix gives you this within the Advanced Technology option. Where die pad positions differ from that of the bond pads, interactive features allow this to be easily achieved. Likewise, once the bond pads have been accurately positioned, the die pads as a die unit can be repositioned. Bond pads are individually placed and constraint rules governing the length and position of the bond wires checked on-the-fly ensuring accuracy at all times.

层跨接通孔,区域,板外形切口和组件(Layer spanned Vias, Areas, Board Outline Cutouts and Components)

Layer Spans

Using the advanced features within the Layer Span option, spanned layer definitions can be created to accommodate your designs. Where Areas or Board Outline Cutouts require multi-spanned layers, for cavities within the board or to create a 'void' from the top layer to an internal layer for example, these can easily be added. Using the same mechanism, components which are required to span internal layers for embedded dies or on flexi-rigid layers can also be accurately placed.


网站首页  |  Evolis 印卡機  |  NISCA 印卡机  |  Matica 自动打凸字机  |  迪艾斯印卡机  |  Magicard 印卡机  |  班马牌证卡机  |  Fargo 印卡机  |  Datacard 印卡机  |  CardPresso发卡软件  |  安防监控系统  |  RETEX机柜  |  Identive接触/非接触式  |  PULSONIX PCB CAD 设计软件  |  PULSONIX强项  |  EBE  |  ISKRA 高压电容器  |  COMITRONIC-BTI  |  电位器  |  电子开关  |  OKW 旋钮头  |  产品目录  |  文件下载  |  联系我们  |  网站地图  |  手机版
  繁體版     简体版     English
Powered by DIYTrade.com