網站首頁
Evolis 印卡機
NISCA 印卡機
Matica 自動打凸字機
迪艾斯印卡機
Magicard 印卡機
班馬牌証卡機
Fargo 印卡機
Datacard 印卡機
CardPresso發卡軟件
利盟鐳射印表機
安防監控系統
RETEX機櫃
Identive接觸/非接觸式
PULSONIX PCB CAD 設計軟件
PULSONIX強項
EBE
ISKRA 高壓電容器
COMITRONIC-BTI
電位器
電子開關
OKW 旋鈕頭
產品目錄
文件下載
聯繫我們

PULSONIX強項 

PULSONIX 高級功能

高級技術可選模組支持:

  • 微穿孔(Micro-vias)
  • 軟硬底板(Flexi-rigid boards)
  • 隱藏嵌入式零件:電阻,電容及平面變壓器(Embedded components: resistors, capacitors and planar transformers)
  • 內置嵌入式零件:半導體及簿芯(Internally embedded components within cavities: semiconductors and thinned dies)
  • 芯片上板COB(Chip-On-Board designs containing bare dies)
  • 層跨接通孔,區域,板外形切口和組件(Layer spanned Vias, Areas, Board Outline Cutouts and Components)


PULSONIX 開發團隊非常積極地將薄型模具技術應用於Pulsonix。 他們大量參與歐洲資助的項目HERMES,對Pulsonix產品取得了非常成功的積極成果。

 

微穿孔(Micro-vias)

微穿孔(Micro-vias)

Micro Vias 3D View

Micro-vias can be easily integrated into your design using functionality within the Layer Spans option. Create intelligent Micro-vias, laser-drilled from the top or bottom sides and differentiated from other non-lasered vias. Micro-via types for normal, tapered, stacked, composite and stacked/tapered can be created to suit your manufacturing processes and requirements. Where Micro-vias require a Stop pad for laser-drilling, this can style can also be defined, as well as a Start pad definition. Composite Micro-vias can be created for multi-spanned vias; these would be separate vias moving as one 'unit' in the design for maximum design integrity.

 

軟硬底板(Flexi-rigid boards)

 

Flexi-rigid Designs

Flexi-Rigid Design

True Flexi-rigid support is available using the features within the Advanced Technology package; Multi-spanned layer Areas, Board Outlines and Layer Spanned Components. Using these powerful options, the Board outline can be created to span 'internal' flexi layers that are still exposed externally. Adding Components to this layer span then allows them to also be exposed to the 'air'. Both through-hole and surface-mounted components on inner flexi layers can be achieved but with true 'side' and layer characteristics available within their Property definitions. This means true assembly reports, manufacturing plots and build details can be exported for an accurate manufacturing process.

隱藏嵌入式零件:電阻,電容及平面變壓器(Embedded components: resistors, capacitors and planar transformers)

 

Embedded Component Technology (ECT)

Embedded Components

Embedded components are becoming more and more common as the need for smaller more dense designs is required. The Pulsonix Advanced Technology option enabled truly embedded components to be properly defined and placed within the board structure, either on an inner surface or internally embedded within the board substrate layer sitting inside a cavity. Using the embedded option, components such as buried and printed resistors, build-up and buried capacitors, planar convertors and transformers can also be easily accommodated such is the flexibility of the Pulsonix interface.

 

COB(Chip-On-Board Design)

Chip on Board

True chip-on-board design requires accurate die and bond pad placement, true connectivity between these pads, accurate shape definition and a host of placement, checking and manufacturing requirements; Pulsonix gives you this within the Advanced Technology option. Where die pad positions differ from that of the bond pads, interactive features allow this to be easily achieved. Likewise, once the bond pads have been accurately positioned, the die pads as a die unit can be repositioned. Bond pads are individually placed and constraint rules governing the length and position of the bond wires checked on-the-fly ensuring accuracy at all times.

層跨接通孔,區域,板外形切口和組件(Layer spanned Vias, Areas, Board Outline Cutouts and Components)

Layer Spans

Using the advanced features within the Layer Span option, spanned layer definitions can be created to accommodate your designs. Where Areas or Board Outline Cutouts require multi-spanned layers, for cavities within the board or to create a 'void' from the top layer to an internal layer for example, these can easily be added. Using the same mechanism, components which are required to span internal layers for embedded dies or on flexi-rigid layers can also be accurately placed.


網站首頁  |  Evolis 印卡機  |  NISCA 印卡機  |  Matica 自動打凸字機  |  迪艾斯印卡機  |  Magicard 印卡機  |  班馬牌証卡機  |  Fargo 印卡機  |  Datacard 印卡機  |  CardPresso發卡軟件  |  利盟鐳射印表機  |  安防監控系統  |  RETEX機櫃  |  Identive接觸/非接觸式  |  PULSONIX PCB CAD 設計軟件  |  PULSONIX強項  |  EBE  |  ISKRA 高壓電容器  |  COMITRONIC-BTI  |  電位器  |  電子開關  |  OKW 旋鈕頭  |  產品目錄  |  文件下載  |  聯繫我們  |  網站地圖  |  手機版
  繁體版     简体版     English
Powered by DIYTrade.com